Testo gas leak detectors
-
D-TEK CO2 Leak Detector Part no. 716-202-G5 -
JAVAC Gas Mate 'Trace-A-Gas' leak detector
ATEX approved leak detector for all HC gases including Trace-A-Gas
For R32, all standard refrigerants and hydrocarbons
Part no. 718-202-G21 -
Meas. Range 0 to +500 ppm CO -
Testo 315-3 - CO/CO2 Monitor incl. USB mains unit cable and case Testo 315-3 with Bluetooth. Parallel and direct CO/CO2 measurement in ambient air according to EN Standard 50543. Convenient, easy operation Measurement values transferable to Testo 330. Convenient, easy operation Data transfer to the testo 330 Parallel CO/CO2 measurement Direct display of both gases Conforms to British Standard BS 6173:2009 Extremely tough sensors Storage temperature -20 to +60 °C Operating temperature 0 to +40 °C Battery life 18 h Probe type Type K Meas. Range -10 to +60 °C Accuracy ±0.5 °C (±1 Digit) Resolution 0.1 °C Probe - Electrochemical measurement CO Meas. Range 0 to 100 ppm Accuracy ±3 ppm (0 to 20 ppm), ±5 ppm (>20 ppm) Resolution 0.5 ppm Probe - Electrochemical measurement CO2 Meas. Range 0 to 10.000 ppm Accuracy ±300 ppm (0 to 4.000 ppm), ±8% of mv (4.000 to 6.000 ppm), ±500 ppm (6.000 to 10.000 ppm) Resolution 10 ppm Probe - humid. sensor, cap. Meas. Range 5 to +95 %RH Accuracy ±2.5 %RH (5 to 95 %RH) Resolution 0.1 %RH -
Testo 315-3 with Bluetooth. Parallel and direct CO/CO2 measurement in ambient air according to EN Standard 50543. Convenient, easy operation Measurement values transferable to testo 330. incl. USB mains unit, cable, and case- Convenient, easy operation
- Data transfer to the testo 330
- Parallel CO/CO2 measurement
- Direct display of both gases
- Conforms to British Standard BS 6173:2009
- Extremely tough sensors
-
Speedy and sure detection of gas leaks in natural gas pipes. The Testo 316-1 natural gas leak detector with two-stage visual alarm system, ideal for carrying out quick and reliable checks. Key Features: Speedy and sure leak detection in natural gas pipes Audible and two-stage visual alarm Audible alarm if limit value is exceeded Optical alarm Overview Hairline cracks in pipes, old and worn out gaskets. Even the tiniest of gas leaks in a natural gas pipe can cause enormous problems. The new Testo 316-1 leak detector will help you pinpoint the exact position of a leak when the leak has already been detected using a leak measuring device, for example. The Testo 316-1 gas leak detector. The sure and easy way to detect methane gas The Testo 316-1 is an especially easy-to-use gas leak detector with an adjustable sensitivity dial. The leak detector is equipped with both a visual audible and an alarm. A yellow LED lights up when the reading is higher than 200 ppm CH4. The LED changes to red when the reading is higher than 10,000 ppm CH4. This special feature allows you to pinpoint the exact position of the leak. The Testo 316-1 is also equipped with a flexible gooseneck sensor for locating gas leaks in especially hard-to-reach or otherwise inaccessible places. The optional Top Safe protective cover is designed to protect your detector against impact and keeps out dust and dirt. What's included: Testo 316-1 electronic gas leak detector, battery. -
Testo 316-2 - Multi Gas Leak Detector
With flexible measurement probe, mains charger and earphonesPart number: 0632 3162Manufacturer: Testo -
Testo 317-2 - Gas Leak Detector Including case with belt clip and wrist strap and batteries Highly practical gas leak detector for fast checks on gas pipe connections, with visual bar display. Shows gas concentration in visual bar display Sensor self-test following switch-on Audible confirmation of readiness to operate Increasing alarm sounds with increasing gas concentration Continuous sound if alarm threshold is exceeded Battery monitoring with optical display Self-test function Measuring range - 0 to 10,000 ppm CH4 1st alarm limit - From 200 ppm CH4 2nd alarm limit - 10,000 ppm CH4 Storage temperature = -20 to +50 °C Operating temperature = -5 to +45 °C Battery life = 4 h (LR03) Weight < 300 g -
Testo 317-3 - CO Monitor Incl. carrying case with belt clip, headphones, wrist strap, sampler and calibration protocol The Testo 317-3 CO monitor detects the presence of carbon monoxide in the surrounding area and warns the user both visually and audibly about dangerous gas concentrations e.g. when installing and servicing gas heaters. 3 year warranty on CO sensor Visual and audible alarm No zero phase, instrument can be used immediately Adjustable alarm threshold CO zeroing at site Self-test function Operating temperature = -5 to +45°C Battery type = 2 batteries Type AAA Battery life = 150 h Probe - CO Meas. Range = 0 to +1999, ppm Accuracy = ±3 ppm (0 to +29 ppm), ±10 ppm (0 to +99 ppm), ±10 % (+100 to +1999 ppm) Resolution = 1 ppm -
Product Detail Smoke tester including smoke paper sheet, smoke chart and cone.
